Teknik Elektronika Industri

  • Advance Electro Hydraulic Training System

    Advance Electro Hydraulic Training System

    0 out of 5

    SPESIFIKASI :

    Hydraulic power unit:

    • Work power: AC:380V
    • Frequency:50Hz
    • Safety rate-limiting range:1000-1500 r/min
    • Power:1.1KW
    • Flow:4.5L/min
    • Oil box volume: 35Ltr
    • Gear pump system: motor pump using open shelf installation, structure compact, low noise, easy to maintenance

    Part list:

    • Training workbench, Hydraulic station, Double-acting hydraulic cylinder, One-way throttlevalve,Throttle valve, Pressurerelief valve (directly actuated), 4/3 Way solenoid valve (M), 4/3-WAY solenoid valve(O), 4/3 Way solenoid valves( Y), 4/3-WAY solenoid valve ( H) ,4/2 Way solenoid valve, 4/2 Way manual shuttle valves, Speed regulator valve, Pilot relief valve,Piloted sequence valve, Pilot type pressure reducing valve, Piloted operated check valve, Check valve, Pressure relay, T connector, Five way connector,Hydraulic distributor, Glycerin pressure gauge, Hose 0.6m,Hose 1m, Hose 1.5m, DC powermodule, Relay module, Buttonswitch module, Power supply forhydraulic pump use,Photoelectric sensor, Capacitysensor, Inductive sensor, Microswitch module (left), Micro
      switch module (right), PLCmodule(Siemens), PLCprogramming software(Siemens), Download cable(Siemens), Testline, Toolkit ,Manual.
  • analog training kit

    Analog Circuit Training Kit

    0 out of 5

    SPESIFIKASI

    • Input power : single-phase, three-wire AC220V±10% 50Hz/60Hz
    • Output power : DC±5V continuously adjustable, DC±12V , DC+5V -+27V
    • Continuous adjustable DC
    • power supply Capacity : < 200VA
    • Adjustable signal source : 2— 20KHZ , adjustable amplitude , three kinds of signal output , frequency coarse and fine tune
  • basic pneumatic

    Basic Electro Pneumatic Training System

    0 out of 5

    SPESIFIKASI :

    • DC power: Input, AC220V, 50Hz/60 Hz
    • Output: DC 24V/3A Air compressor: Power: AC 220V±10% 50Hz/60Hz Motor power: approx. 480W Nominal volume: approx. 6L normal Output approx. 0.8 MPa Noise degree: approx. 66 dB
    • Part list: Workbench, Silent Air compressor, Manifold block (air terminal), Double-acting cylinder, Single-acting cylinder, 5/3 solenoid directional valve central vented, 5/3 solenoid directional valve central exhaust, 5/3 solenoid directional valve central pressure, 5/2 single solenoid shuttle valve, 5/2 double solenoid shuttle valve, 3/2 single solenoid shuttle valve NC, 3/2 single solenoid shuttle valve NO, 5/2 handle shuttle valve Mushroom button valves (Mushroom button valves), 5/2 handle shuttle valve, 5/3 handle shuttle valve, Single pneumatic control 3/2, Double pneumatic control 3/2, Single pneumatic control 5/2, Double pneumatic control 5/2, Dyad(pressure regulator & air filter), Reducing valve, One-way valve, Pressure gauge, One-way throttle valve, 3/2 knob valve, 3/2 Stroke valve, 3/2 Stroke valve, 3/2 knob valve (3/2 push botton valve), Time delay valve, Sequence valve, “And” gate-type dual pressure Valve, “Or” gatetype shuttle valve, Quick escape valve, Micro switch valve (left trigger), Micro switch valve (Right trigger), Photoelectric Sensor,capacitive sensor, Conductive sensor, Test wire, DC power supply unit, Relay, Button switch unit, Hose Ф4, Hose Ф6, 4 T Valve, T connection, APG reducing straight coupling, Tool kits, Pneumatic Simulation software, User manual.
  • Digital Circuit Training Kit

    Digital Circuit Training Kit

    0 out of 5
    • SPESIFIKASI :
      • Input power: single-phase, three-wire AC 220V±10% , 50Hz/60Hz
      • Output power : DC±5V continuously adjustable, DC±12V, DC+5V─+27V Continuous adjustable DC power supply Capacity : < 200VA One set adjustable signal source : 2—20KHZ, adjustable amplitude. Three kinds of signal output ,the frequency coarse and fine tune
      • Part list: Digital experiment box, Power area, Logic pen, einmal pulse source, signal generator, frequency meter unit, Resistance part, capacitance part, audion part, Integrated circuit, Logic level show, logic level output unit, Bread board area unit, Date capture card, Power line, Testing line, Manual book
  • electronic skills and pcb production process, training device

    Electronic Skills and PCB Production Process, Training Device

    0 out of 5

    SPESIFIKASI :

    • Input power: single-phase, three-wire AC 220V±10% 50Hz/60Hz
    • Output power:
      • AC 220V safety socket output Capacity: <1.5KVA Power box provides low-voltage
      • power supply module: Low voltage AC power: 0V, 3V, 6V, 9V, 12V, 18V, 24V, 36V, current 2A. DC
      • power supply: 1.25 ~ 30V / 1.5A continuously adjustable., intelligent dual-display voltage ammeter (external test), with automatic overload protection.
    • Signal generator: frequency range 0-6Mhz continuously adjustable
  • Modular Product System

    Modular Product System

    0 out of 5

    SPESIFIKASI :

    • 1. Input Power: Single phase ~ 220V ± 10% 50Hz
    • 2. Leakage protection: I â–³ n ≤ 30mA, t ≤ 0.1S
    • 3. AC220V AC power
    • 4. 24 V DC power output
    • 5. Accident emergency stop button, power indicator, power indication
    • 6. Power off misuse power protection
    • 7. Working environment: temperature – 10 ℃ ~ +40 ℃ Relative humidity 35% ~ 65% (25 ℃) altitude <4000M
    • 8. Installed capacity: ≤ 5kVA
    • 9. Operation compressed air: 5 ~ 6bar
  • OP-AMP Circuit Trainer

    OP-AMP Circuit Trainer

    0 out of 5

    SPESIFIKASI :

    • Basic Linear Amp Differentiator and Integrator Voltage and Current Circuit Non-Linear Signal Processing GeneratorActive Filter

    Bread Board:

    • Socket Strip(630 holes) : 2pcs
    • Strip(100 holes) : 3pcs
    • DC Output : 5/6V, 9/12/15V(Dual Output)
    • Decade Capacitor : 0.001~0.1µF(2 digits)
    • Prog. Resistor : 10kΩ~1.5MΩ(2- BCD)
    • Variable Resistor : 1/100kΩ(2ea)
    • Current : 0~10mA/100mA(2 ranges)
    • Protection : DC overload alarm & indication
    • Speaker : approx. 8Ω, 1W
    • Input Voltage : AC 220V, 50/60Hz
  • Portable Solar Power Experiment Box

    Portable Solar Power Experiment Box

    0 out of 5

    SPESIFIKASI :

    • Accumulator capacity: 12V/7Ah
    • Input voltage: AC220V/50Hz/60Hz
    • Solar cell module:
      • Power: approx. 10W;
      • Voltage: ±18.0V;
      • Current:  0.56A
      • Open-circuit voltage: 22.30
      • Short-circuit current: 0.60 A
      • Solar controller current : 12V/2A
      • Two output modes: Common on/off mode & Electric on/off mode
    • Inverter:
      • Rated input voltage : 10~15V
      • Rated output voltage : AC220V±10%, 50Hz/60Hz;
      • DC5V Output wave : Sine wave
      • Rated output power : ± 150W
      • Low voltage shut down : 9V~10V
      • Overpressure shutoff : 14.5~15.5
      • Protection function : overload,overvoltage,short circuit,low tension,high temperature,reverse
  • Programmable Logic Controller Training Set

    Programmable Logic Controller Training Set

    0 out of 5

    SPESIFIKASI :

    • Input power: 3 Phase five-wire AC 380V±10% 50Hz/60Hz
    • Output power: AC 380V safety terminal output AC 220V safety terminal/socket output DC 0-10V safety terminal output DC 0-20mA safety terminal output
    • Capacity: < 1 kVA
    • Part list: Workbench, Power box, PLC module, Motor control module, Mail sorting module, Traffic lights module, Robot control module, Automatic feed loading module, Processing center module, Sky tower light module, Rolling machine module, Intermediate relay module, Selflock button module, Self-recovery button module, Instruction module, Power adapter module, Test line, CD, Download line, User Manual.
  • Proximity Sensor Training Set

    Proximity Sensor Training Set

    0 out of 5

    SPESIFIKASI :

    • Input power : single-phase, three-wire 220V±10% 50Hz/60Hz
    • Output power : AC power supply 220V±10% 50Hz/60Hz AC power supply : 7.5V(1A) two sets , fixed DC power supply +5V (1A) ,+12V (1A) ,+35V(1A),- 12V(1A) Adjustable DC power supply : 0~30V (1A)
    • Capacity : < 1.5 KVA
    • Rated power : < 1KVA Turn source : 0 – 200 r/min (adjustable)
    • Environment temperature : -10°C – 40°C
    • Relative humidity : ≤ 85 %
    • Part List: Workbench Testing object box (Photoelectric, magnetic, capacitance, inductance, ultrasonic, Hall, eddy current sensors detection medium, etc.) Position slide Measuring scale Optical fiber sensor(correlation) Optical fiber sensor(Diffuse Reflectance) Indicate and buzzing unit Electromagnetic induction proximity sensor Small, long distance detection and amplifier built-in type photoelectric sensor (Launcher) Small, long distance detection and amplifier built-in type photoelectric sensor (Receiver) Optical fiber amplifier Mirror reflecting photoelectric sensor Mirror reflecting photoelectric sensor reflecting unit Small, long distance detection and amplifier built-in type photoelectric sensor (Diffuse type) Photoelectric sensor M18 Inductive proximity sensor M12 Inductive proximity sensors M18 flush type Inductive proximity sensors M18 exposed type Capacitive Proximity Sensor M18
error: Maaf, Konten sudah di proteksi !