Kimia Industri

  • Alat Distilasi

    Alat Distilasi

    0 out of 5

    SPESIFIKASI :

    • Skala laboratorium,
    • terbuat dari kaca/gelas yang tahan terhadap panas
    • bahan kimia korosif,terdiri dari labu distilasi 250 mL,dan pendingin/kondensor Leibig
  • XDð

    Atomic Absorption Spectrophotometer

    0 out of 5

    SPESIFIKASI :

    • Optical system Wavelength range: 190-900nm
    • Grating mark density: approx. 1800 lines
    • Spectral bandwidth: approx. 0.2nm, 0.4nm, 1.0nm, 2.0nm, for multiple auto-switching
    • Wavelength precision: ±0.2nm
    • Wavelength repeatability: approx. 0.05nm
    • Baseline drift: approx. 0.002 A / 30 min
    • Detectors: Wide spectral range photomultiplier tube
    • Spectral bandwidth deviation: Copper lamp approx. 324.7nm 0.2nm and bandwidth deviation within ±0.01nm – Light source system
    • Lamp holders: Four lamp holders for auto-switching
    • Lamp power supply mode: 400Hz square wave pulse
    • Atomization system Concentration (Cu): 0.025μg/ml/1% LOQ (Cu): approx. 0.006μg/mL
    • Burner: approx. 100mm, singleslit titanium metal burner, which is air-cooled pre-mixed type
    • Precision: RSD≤0.8%
    • Measuring methods: Airacetylene flame method and atomic absorption method for hydride generator
  • Soxhlet Extractor

    Auto Soxhlet Fat Extractor

    0 out of 5

    SPESIFIKASI :

    • Power Requirement: approx. 1000W
    • Warming time: approx. 10 min
    • Recycle system: Automatic Recycle rate: ≥80%
    • Temperature control range: Room temperature-100°C
    • Difference: Even heating and automatic recycling, automatic soaking and extraction, save working time
  • Bernoulli's Theorem Demonstration

    Bernoulli’s Theorem Demonstration

    0 out of 5

    SPESIFIKASI :

    • Manometer range 0-300 mm
    • number of manometer tubes are 8
  • Centrifugal Pump Demonstration Unit

    Centrifugal Pump Demonstration Unit

    0 out of 5

    SPESIFIKASI :

    • Small scale centrifugal pump unit, comprising of water reservoir, pump, control valves and interconnecting pipework.
    • Equipped with electronic sensors for pump head pressure, suction, flow rate, and water temperature, also computer system operational.
  • Centrifuge

    Centrifuge

    0 out of 5

    SPESIFIKASI :

    • Max. Speed: approx. 5000 rpm
    • Max. RCF: approx. 4390 xg
    • Swing Rotor: approx. 8x50ml (4000 r/min RCF 2810 xg)
    • Timer Range: 0 ~ 99 min
    • Motor: Brushless Motor
    • Power Supply: AC 220V 50Hz 10A
    • Noise: ≤65dB
  • Evaporator Apparatus

    Evaporator Apparatus

    0 out of 5

    SPESIFIKASI :

    • Laboratory evaporation system : Rising or falling film single/ double effect Temperature controlled pre-heat stage Manual control console Completed with adjustable recirculation on each evaporation stage, integral USB interface, vacuum pump, condenser and condensate vessel.
  • Filtration Apparatus

    Filtration Apparatus

    0 out of 5

    SPESIFIKASI :

    • Standard a plate and frame batch filter.
    • Electrical circuits Console : pump motor control and display panel.
    • Interface device and eduacational software
  • Flow Meter Demonstration

    Flow Meter Demonstration

    0 out of 5

    SPESIFIKASI :

    • Manometer range : 0 -440 mm
    • Number of manometer tubes : 8 Completed with orifice plate dan venturi
  • Fluid Mixing Studies

    Fluid Mixing Studies

    0 out of 5

    SPESIFIKASI :

    • Vessel : approx. 25 L, made from clear materials, drain tap, removable baffles.
    • Agitation variable speed : approx.. 0 – 500 rpm.
    • Impellers : various different design ± 8.
    • Power : approx.. 0 – 75 watt.
  • Free and Forced Vortek

    Free and Forced Vortex

    0 out of 5

    SPESIFIKASI :

    • Tank diameter : ± 245 mm
    • Height to overflow point : ± 180 mm
    • Completed with orifice, forced vortex measuring probes, and pitot tubes.
  • Gas Chromatography

    Gas Chromatography

    0 out of 5

    SPESIFIKASI :

    • Column Oven Temperature operating range : Higher than the room temperature of 5ºC-450ºC
    • Temperature setting : 1ºC; programmed heating rate 0.1ºC
    • Maximum heating speed : approx. 120ºC/min.
    • Temperature stability : It will be 0.01ºC, when the environment temperature changes 1ºC.
    • Programmed temperature steps : 7 steps
    • Column loss can be compensated (dual channel column)
    • Injectors :
      • Various injector available: packed column injectors, split/splitless capillary column injectors or cool on-column injectors.
    • Detectors :
      • FID Max temperature control : approx. 400ºC
      • LOD : ≤ 5 x 10-12 g/s [n-C16]
      • Linear dynamic range : ≥107
      • Drift : ≤ 5 x 10-13 A/30min
      • Noise : ≤2 x 10-13 A
      • TCD Max using temperature : approx. 400ºC
      • Sensitivity : ≥10000mv.ml/mg [nC16]
      • Linear dynamic range : ≥104
      • Drift : ≤ 10 0uV/30min
      • Noise : ≤20 uA FPD
      • Max using temperature : 250ºC LOD : ≤2 x 10-13g/s(P), ≤5 x 10- 11g/s (S)
      • Linear dynamic range : ≥103(P),≥102 (S)
      • Noise : ≤2 x 10-12 A Drift : ≤4 x 10-11 A/30min
      • ECD
      • Max using temperature : approx. 350ºC
      • Drift : ≤5 0uV/30min
      • LOD : ≤1 x 10-14 g/ml (y-666)
      • Linear dynamic range : ≥104
      • Noise : ≤20uA
      • NPD : Max using temperature : approx. 400ºC LOD : ≤5 x 10-13g/s(P),≤1 x 10-12 g/s (N)
      • Noise : ≤4 x 10-13 A
      • Drift : ≤2.5 x 10-12 A/30min
      • Linear dynamic range : ≥103(P),≥103 (N)
      • PDHID
      • LOD : ≤ 5 ppb
    • Include Nitrogen Hydrogen and Air Generator
error: Maaf, Konten sudah di proteksi !