Basic Principles of Digital Technology & Electronics

For one set of equipment for learning basic electrical and electronics up to digital control in one panel equipped with a function generator. Minimum configuration 1 unit power supply unit input 1 x approx. 100 - 230 V AC 50/60 Hz, output: 1 unit universal patch panel 1 set of components for electrical engineering/electronics contains all of the components for carrying out basic tests for direct current technology, 29 resistors 2W, 1 unit coil: approx. 100 mH, 7 diodes: 1x AA118, 6x 1N4007, 2 Zener diodes: 1x ZPD 3.3, 1x ZPD 10, 2 LEDs: 1x blue, 1x red/green, 1 set bulb: approx. 12 V 62 mA, 1 set toggle switch, 1 set Diac: DB3, 1 set mounted transformer: 2 coils with approx. 600 windings, 1 coil with approx. 200 windings, 1 separable core, retainer for transformer core 8 transistors: 1x BC 140-16, 1x BC 547B, 1x BC 160-16, 1x BC 140-16, 1x 2N 3820, 1x FET 2N 3819, 1x 2N 2647, 1x BS 250 1 thyristor 1 triac 1 set compact unit of voltage supplies and squarewave generator in one, suitable for all tests on digital and control technology 1 set of components for digital technology contains all of the components for carrying out basic tests on digital technology, in housings compatible with the 19 mm safe technology plug system. Consists of: 1 set inverter (3 inverters, 3 Schmitt) trigger, 1 unit AND with 2 inputs, 1 unit OR with 2 inputs, 1 unit NAND with 2 inputs, 1 unit NOR with 2 inputs, 1 unit XOR with 2 inputs, 1 unit AND with 4 inputs, 1 unit OR with 4 inputs, 1 unit hex switch (2-way), analogue source approx. 0 - 5 V, 1 unit 10L resistor, 1 set μF capacitor, 1 unit LED bar graph, 10-digit 1 unit counter 4 bit, 1 unit 7-segment display, single-digit, can be switched between hex/DEC/seg, 1 unit RS flip-flop, 2 unit JK flip-flops, 1 unit shift register, 8 bit par-ser, 1 unit shift register, 8 bit ser-par, 1 unit full adder, 4 bit 1 unit signal input (4x latch/pushbutton, 1x pushbutton - Safe 4 mm lab cables, breadboard - User manual and experiment module