Air Compressor
Spesifikasi :
- Air Re-Tank approx. 125 ℓ Power approx. 3 Hp (2.2Kw) 1Φ/4P/220V
- Cylinder Volume approx. 495 cc
- Displacement approx. 357 â„“/min
- Type & Pulley Dia. A1 & approx. 350 mm
- Motor Pulley Dia. approx. 152.4mm
- Charging Time approx. 125 â„“ / 214 sec
- Pump R.P.M approx. 721
- Working Pressure 6~8.5 Kgf/ãŽ
- Motor R.P.M approx. 1,715
- Reviews (0)
Be the first to review “Air Compressor”
Related Products
-
Read MoreQuick ViewGas Analyer For Motorcycle
Spesification :
Standard accessories
- Exhaust probe and tap assembly
- Sample hose / power cord / moisture trap filter element Technical data
- CO measurement range : 0-9.99% with approx. 0.01% resolution
- HC measurement range : 0-9999Â ppm with approx. 1ppm res.
- Microprocessor control- Automatic zero and span adjustment
- Full digital display visible in any light
- LED indicators for all functions
- Membrane switches -Serial PC interface
- Fast response time
- Automatic calibration
- Flow absence detector
- Response time : approx. 10 sec
- Pre-heating time : approx. 3- 8min.
- Power supply :110/220/240Vac 50/60Hz
Read MoreQuick View -
Read MoreQuick View
Pneumatic Air Impact Wrench
Spesification :
- Square Drive: approx. 1/2″
- Max Torque: approx. 500 FT-LB (650 Nm)
- Free Speed: approx. 11000 R.P.M.
- Air Consumption: approx. 4.2 CFM
- Air Inlet: approx. 1/4″
- Air Pressure: approx. 90 PSI
- Overall Length: approx.122 mm
- Air Hose: approx. 10 mm
- Mechanism : Jumbo Hammer
- Noise Level (dBA) : approx. 94
- Head Length : 99 mm
Read MoreQuick View -
Read MoreQuick View
Retractable Air Hose Reel
Spesification :
- Size: 6.5mm X 10.0M
Read MoreQuick View -
Read MoreQuick View
Motorcycle Injector Tester & Cleaner
Spesification :
- Turning speed range approx. 0~7500 r/min
- Timing pulse length approx. 0~9900times/step length 100
- Pulse length 0-20ms step length 0.1ms
- Timing approx. 0~10min
- System pressure 0~0.6Mpa ,
- Ultrasonic cleaning power approx. 70W
- Power supply AC220+-10% 50/60Hz,
- Stimulant signals 0+-5V,
- Output scope of the pulsed signals +5V,+12V
Read MoreQuick View -
BASIC ANALOG COMMUNICATION TRAINER
Spesifikasi :
- Trainer ini bertipe panel bersifat modular untuk mempelajari teknik dasar elektronika komunikasi analog.
- Terdiri dari 17 modul panel; di antaranya modul Signal Source, Balance Modulator, Detector, Tuned Circuit, Amplifier, dll.
- Dilengkapi dengan buku petunjuk percobaan (terdiri dari 13 percobaan,
di antaranya Modulasi Analog AM dan FM, Demodulator, Filter, dll.). - Menggunakan sumber tegangan kerja 220 V AC/50 Hz, ± 15 V DC dan variabel
+1 sampai +20 V DC / 1,5 A. - Koneksi antar modul menggunakan jembatan penghubung dan kabel penghubung dengan konektor berdiameter 4 mm.
- Dilengkapi dengan rangka besi yang kokoh dengan konstruksi mudah dirakit untuk menyusun modul panel pada saat melakukan percobaan.
- Dilengkapi aksesoris pendukung percobaan.
Read MoreQuick View -
Read MoreQuick View
Electrical Wiring Diagram Simulator for Motorcycle
Spesification :
- Minimum overall dimensons:1600 x 1280 x 600 (mm)
- Minimum main board dimensions: 1200 x 800 x 45 (mm)
- Main power: approx. 2A/220V AC Integrated on board modules embeded with interface connection board
- Connection system: Bluetooth and USB
- Upgradable modules and software Teaching modules: 2 modules (motorcycle elctrical body, EFI)
Read MoreQuick View -
Read MoreQuick View
Motorcycle Wheel Balancer
Spesification :
- Unit system: inch/mm, gram/ounce
- Power supply 110V/220V
- Motor power approx. 185-320W
- Balancing speed approx. 190rpm
- Balancing precision ±1g
- Rim diameter 265-615mm
- Rim width 40-510mm
- Max wheel weight 70kg
Read MoreQuick View -
Read MoreQuick View
Engine Sepeda 1 Motor 2 Tak On Stand (Non Life)
Made from all new components (not recycled/repainting)
Specification :
- Composition : 2 Stroke Engine ASSY, AC 220V
- Single phase 220V speed control motor is attached
- Training Contents Cycle Training, Suction/Exhaust, Structure.
- Desktop model, component placed on stainless plate
Read MoreQuick View -
Read MoreQuick View
Mechanical Tool Set
Contains Package :
- Approx. 3 Drawer Portable Tool Cabinet,with specifications
- Steel Thickness:
Bottom: 0.8mm. - Drawers:
0.7mm., - Drop-top cover:
1.0mm. - Weight loading Accepted:Â For drawer is around 10 kg.
- Overall Size: approx. (W) 535 x (D) 220 x (H) 290 mm.
Consist of :
- Drawer 1 :1/4″ dr socket :
4,4.5,5,5.5,6,7,8,9,10,11,12,13,14 mm Extension bar 2″ & 4″, - Sliding T Bar : 4-1/2″
- Flexible Handle : 6″
- Bent handle Ratchet,
- Universal joint, 3/8″
- Drive socket :
6,7,8,9,10,11,12,13,14,17,19,21mm,
Extension bar 3″ & 6″ - Sliding T bar : 8″,
- Flexible handle : 8″,
- Bent handle Ratchet
- Universal joint,
- Adaptor : 3/8Fx1/4M
- Drawer 2 contains :
- Socket : 8,10,11,12,13,14,16,17,18,19,20,21,2 2,23,24,27,30,32 mm
Extension Bar : 5″ & 10″, - Sliding T bar : 10″,Deep socket : 14,17,19,21,22 mm
- Bent handle Ratchet,
- Universal joint,
- Sparkplug socket 16 mm
- Drawer 3 contains :
- Combination wrench : 6,7,8,9,10,11,12,13,14,15,16,17,18,1 9,20,21,22,23,24 mm
Read MoreQuick View -
Read MoreQuick View
Motorcycle Universal Diagnostic Tool
Spesification :
- 1. Power: DC 10~15V
- 2. Working Current: approx. 250mA
- 3. Screen: approx. 160*105 LCD display
- 4. Keyboard: approx. 6 membrane keyboard
- 5. Upgrade port: USB Port
- 6. Communication port: COM port
- 7. Ports: diagnostic port, COM port, USB port, Power port
Read MoreQuick View
Reviews
There are no reviews yet.